lefty
Well-known member
- Joined
- Oct 10, 2012
- Messages
- 87
- Reaction score
- 0
i wanted to maximize my storage area. more room for my tackle. be able to put the seat under the deck when not in use. more deck room to slide my rods further back, in turn giving me more side to side standing room up front.
i kinda tried to mimic a bass boat layout without the console. there will be a step between the two deck extensions.
plan on using PALIGHT for the decking. its basically PVC board. just like pipe but in a sheet. much lighter than plywood.
as you see this is an all electric boat.
i want to wire up some solenoids to cut on the rear motors from the front deck. but i dont know how to wire it up or which solenoid to get. or do i have to get two? any help would be appreciated.
will post more pics as i get more progress.
i need a nice TINBOATS decal so i can represent! (HINT HINT!!)
i kinda tried to mimic a bass boat layout without the console. there will be a step between the two deck extensions.
plan on using PALIGHT for the decking. its basically PVC board. just like pipe but in a sheet. much lighter than plywood.
as you see this is an all electric boat.
i want to wire up some solenoids to cut on the rear motors from the front deck. but i dont know how to wire it up or which solenoid to get. or do i have to get two? any help would be appreciated.
will post more pics as i get more progress.
i need a nice TINBOATS decal so i can represent! (HINT HINT!!)