So the last few days I have been working on my boat and getting it ready for trout season. I rebucked all the rivets on the seams, but the seal inside must be damaged be a use it still Leaked. I sealed the seams with gflex epoxy (didn't have 60 bucks and an hour to drive and get gluvit). It worked great and the seams are not leaking anymore. YAY! I also had a few rivets on the bottom that were leaking but not much, so upon cleaning them up to get ready for the epoxy I noticed the bottom is starting to pit (I previously thought this was just salt or a bad paint job). For now I filled the bad one with epoxy whike I epoxied the rest of the rivets.
My question is, what can I do to prevent this from getting any worse?
And In guessing the gflex has no UV protectant in it, what should I use to paint over this? I was thinking maybe just rattle can clear coat? I have it on the outside and inside seams.
Sent from my SAMSUNG-SM-G890A using Tapatalk
My question is, what can I do to prevent this from getting any worse?
And In guessing the gflex has no UV protectant in it, what should I use to paint over this? I was thinking maybe just rattle can clear coat? I have it on the outside and inside seams.
Sent from my SAMSUNG-SM-G890A using Tapatalk