jw2
Member
After about 2 months of grueling stripping, sanding, sealing, cutting, nailing and carpeting, I HAVE FINALLY FINISHED!! I did ok about taking pictures in the begining but slacked off in the middle. I do have some pictures of the finished product so you can get the basic idea. Thanks for looking!
This is basically how I got the boat and trailer. At this point I had already started to remove the brown paint from tthe trailer.
Stripping the paint off the fenders and frame of the trailer.
Trailer is near completion. I stripped, sanded and painted everthing as well as a new winch, new running boards, carpet, lights, wheeles and tires.
Boat before mod. The owner did a great job on the casting decks but the color just wasn't for me. Plust there was a few things i wanted to change. Replaced all 2x4s with 2x2s to lighten the load. Also decks were built using OSB and I wanted to replace with plywood.
Tearing out the decks.
I didn't take any pictures of the actual build. It was freezing and raining most of the time and took everything I had just to convince myself to go out and work on it. Here is the finished product though. I tore out EVERYTHING. Patched every rivet with West Marine's aluminum epoxy. (expensive at $20 a tube but definately worth it!) Stripped and sanded and painted every square inch of the boat, rebuilt transom, all framing, decks and new carpet. Used piano hinges on the two deck compartments and built a carpeted lid/battery compartment. Lastly I added new posts and seats. I still have a few things I want to do such as wire for lights and add depth finder, but over all I AM DONE!! I love the finished product and had a blast during the whole process. Hope ya like it! Thanks for everyone's input. Thanks REDTAIL for helping with the decks and ideas for a better build!
This is basically how I got the boat and trailer. At this point I had already started to remove the brown paint from tthe trailer.
![DSCN0779.jpg](https://proxy.imagearchive.com/9de/9defadeacb9982f793f509f5bf8519e5.jpg)
Stripping the paint off the fenders and frame of the trailer.
![DSCN0777.jpg](https://proxy.imagearchive.com/aa8/aa82bac44395afcabde5b97d8b5da76c.jpg)
![DSCN0775.jpg](https://proxy.imagearchive.com/dec/dece680a28721582ea53ef08e4a27911.jpg)
Trailer is near completion. I stripped, sanded and painted everthing as well as a new winch, new running boards, carpet, lights, wheeles and tires.
![DSCN0792.jpg](https://proxy.imagearchive.com/27e/27e292a623894a45f261ed8b0d248d89.jpg)
![DSCN0793.jpg](https://proxy.imagearchive.com/2f5/2f5a8fd370d79320c733cab73509f7ba.jpg)
![DSCN0794.jpg](https://proxy.imagearchive.com/30e/30eb2764b3fc5881571cfa5783bb28ca.jpg)
![DSCN0796.jpg](https://proxy.imagearchive.com/963/963b896a81614198ae23a4bcca0e8aff.jpg)
Boat before mod. The owner did a great job on the casting decks but the color just wasn't for me. Plust there was a few things i wanted to change. Replaced all 2x4s with 2x2s to lighten the load. Also decks were built using OSB and I wanted to replace with plywood.
![DSCN0784.jpg](https://proxy.imagearchive.com/432/432ba7e35a93a188a1583a864bbd5a6b.jpg)
![DSCN0781.jpg](https://proxy.imagearchive.com/a2f/a2f5467ba25c0e3f47dd0367c85e01df.jpg)
![DSCN0778.jpg](https://proxy.imagearchive.com/186/186ea9648a26d35e2f057711d0e8db62.jpg)
![DSCN0780.jpg](https://proxy.imagearchive.com/799/799d8c3d22fc1391f948fe9c04a77d86.jpg)
Tearing out the decks.
![DSCN0786.jpg](https://proxy.imagearchive.com/5da/5da398e3fef04935ee285dd7a002fde0.jpg)
![DSCN0787.jpg](https://proxy.imagearchive.com/096/096de4e403f53667fb21b3ea8049d9a3.jpg)
![DSCN0788.jpg](https://proxy.imagearchive.com/1f9/1f9b1893446cdd8a3d889500274fc9ba.jpg)
![DSCN0790.jpg](https://proxy.imagearchive.com/b83/b83647112cb5f8f351811cb0ea40ca9c.jpg)
![DSCN0789.jpg](https://proxy.imagearchive.com/49a/49ae2a19c086a87bfb39ed9ef3710ce7.jpg)
I didn't take any pictures of the actual build. It was freezing and raining most of the time and took everything I had just to convince myself to go out and work on it. Here is the finished product though. I tore out EVERYTHING. Patched every rivet with West Marine's aluminum epoxy. (expensive at $20 a tube but definately worth it!) Stripped and sanded and painted every square inch of the boat, rebuilt transom, all framing, decks and new carpet. Used piano hinges on the two deck compartments and built a carpeted lid/battery compartment. Lastly I added new posts and seats. I still have a few things I want to do such as wire for lights and add depth finder, but over all I AM DONE!! I love the finished product and had a blast during the whole process. Hope ya like it! Thanks for everyone's input. Thanks REDTAIL for helping with the decks and ideas for a better build!
![DSCN0798.jpg](https://proxy.imagearchive.com/b22/b22b26d78dcf8afe506c8eeaf9730835.jpg)
![DSCN0799.jpg](https://proxy.imagearchive.com/962/962174eb7963cd70924b190cde48f88c.jpg)
![DSCN0801.jpg](https://proxy.imagearchive.com/3ff/3ff6d554498c5e9afe311a93fbc81f8f.jpg)
![DSCN0802.jpg](https://proxy.imagearchive.com/d3a/d3a4d98c0b8792107ebddf6146f84fbf.jpg)