tdub said:Sum-kina I am thinking about adding a 12" extension to the front deck with a flip top lid for more storage, for now I'm going to take a break because I'm sick off working on it and just want to burn some fuel and catch some fish.
tdub said:I put in some stuff called tex tread mixed in with the paint for the first coat for some traction, then painted over that after it dried with only paint for the second coat.
Howard said:About how much for the aluminum floor?
What alloy was that? I can barely get .063 for that price, at least in 5052. I paid 198 for a 4 x 8 of .125, and the .090 (which I use a LOT of) is 130 (all 5052).tdub said:Hey guys
I paid $120 for a 4x8x1/8 sheet of aluminum and $42 for the 2x1x1/8 aluminum "C" channel(16'). This was alot cheaper than I thought it would be.
tdub said:I am not sure about the alloy. It is not very flexable at all. I had to stand on the ribs as I fastened them down but it worked very well. As far as the cost goes, it could just be a location to location cost difference. I don't know, this is what it cost because I'm looking at the invoice now.
Enter your email address to join: