Recent content by agentxman

did you get a chance to build the side storage yet?

Thats what I needed. Thanks

I need to know what gauge wire I would need to use for nav lights and interior lighting. any help wold be great.

well after 2 years not being able to work on the boat, I started to work on her again. after reading post after post on painting I felt that it was time to paint her. First I started sanding then I used a wire brush wheel around all the rivets, then more sanding. I used 3 coats of self etching...

I just redid my transom wood and i used Fiberglass resin. About 2 coats should be fine.

I have a 1988 9.9 Gamefisher that the steering is real stiff. I tried to loosen the steering friction bolt and still nothing. any help would be great.

I use non ethanol gas. I pulled the spark plugs and both are getting spark. I will check the carb.

I have a 1988 gamefisher 9.9. I can get the motor to start on the fist pull. Yesterday I took the boat out and it was running fine. I went full throtle and it was going great for 10 mins or so then it slowed to half. I checked the fuel line from the tank and it was good, I checked the air vent...

woodruff key is ok. compression on the top cylinder is 95 and the bottom is 100.

I have a 1988 9.9 gamefisher 225.581990 model. I replaced the coils and adjusted the points. I rebuilt the carburetor and got fresh non ethanol gas. I made sure I was getting spark on both plugs and wires. I have tried to get it started and nothing. a couple of times it sounded like a backfire...

Does any one know the best way to remove the flywheel on a 1991 9.9 gamefisher?

any luck on getting it going?

new Photos

New Photos

Sorry I haven't updated my post. I scraped the first flooring frame and I am now working with aluminum from a bunch of cubicles. The aluminum is very strong and light. I put my center seat back in and will use it as a dry storage. Hope to post some new pics here tomorrow.