Recent content by fireshadow

That's a great set up. I really like that one.

i have never had a problem with overlap. just don't bother trying to coat completely over the old paint. I would just focus the self etching over the bare allum so the topcoat has something to grab a hold of. the new paint will grab fine to the old paint.

Rustolmem pro grade from home depo or lows is great stuff. Cheap, easy to get and holds well. Just make sure to use self etching primer if you take it down to bare metal or even on spots where the old paint rubbed off.

Would love to see how this is done. Just saw one like this last week. Coolest thing ever.

Does anyone know of a good kill switch with lanyard. I fish a lot with just my little one and was thinking the other day that I need to find one of these just incase I get knocked overboard or something else happens I don't want the going along without me. It would be on a 1963 evinrude 18 hp.

Does any one have a writeup on how to change the seals on an 1963 evinrude 18 hp gear case. I have to replace the cradle and shift fork so I figured I would replace all the seals as well since I have it apart. The service manual shows how it's done with the special tools but was trying to avoid...

I have Berkley Rod Racks mounted in my boat. They work great. I used the same thing and drilled a small hole on the top and bottom to fit a little twelve in bunngy cord. Works great just need to buy another set for when I have a friend along. Imlike to keep alot of poles in the boat since i...

Got to see this. Can't wate.

Where did you get the battery meaters I like those. I've been wanting to find something so I can have a constant read on my batterys.

That's funny. I said the same thing to my wife. Me and my friend made sure that the front casting deck was a little longer than the original bench. And the front seat mount was flush so she could lay out. Made it much easier to find time to work on the boat after this was explained and shone to...

I would like one also.

Thanks will try that. Thought contact cement might work but that sounds better.

I am finally ready to put carpet down!! What do you guys recommend using on polyurethane coated wood?

In

Aircraft Stripper is the best one I used. And I tried three different types. Plus one one hand wire brush green abrasive pads work great too.