Recent content by MartyLowe1546

Todd thank you for taking the time to reply. I’m coming from a Jon boat with a 48qt cooler that did just fine but then again I’ve never had any real giants in there as well. A lot of the questions in your post I don’t know the answer to pertaining to the size of the fish and livewell water temp...

Good morning everyone I greatly appreciate all and any feedback in advance. I just recently purchased a Havoc Marshrunner and I ordered it with there livewell option which I was told was 15 gallons. After picking the boat up the livewell appeared a little smaller then I was expecting. So I...

My bobs versa trim and tilt jac plate trims up and down flawlessly from idle to about half throttle anything above half throttle it will not trim up. Does anyone have any idea as to why this is ? I have no leaks no kinks in the lines and the fluid is on the max fill line in the resivivor. Thanks...

Its 6.5" off the transom think I got it all dialed in today my top speed before the jack plate was 27mph loaded at wot and now I'm getting 28mph I really appreciate the reply.

I just recently installed a bobs versa tilt and jac plate with the hydraulic tilt and manual jac on my 1546 Lowe today which is powered by a 2018 25 mercury with a 12.5 pitch prop the entire jac plate with pump weighs about 60 ponds. I tried the Boat out for the first time today and im having a...

I just recently installed a bobs versa tilt and jac plate with the hydraulic tilt and manual jac on my 1546 Lowe today which is powered by a 2018 25 mercury with a 12.5 pitch prop the entire jac plate with pump weighs about 60 ponds. I tried the Boat out for the first time today and im having a...

I really appreciate you taking the time to write a reply. If I am understanding you correctly I should set it to 1 spark for every two revolutions ? I tried setting it to 1 spark per every revolution and it was extremely high which I knew was incorrect.

Good afternoon everyone and in advance I appreciate everyone's input. I recently purchased a Lowe 1546 jon boat paired up with a 2018 25 mercury efi four stroke. Shortly after I purchased a tach off amazon to determine what pitch prop to purchase because with the current 12.5 pitch prop it...

I do not have a part # but here is what they have listed on this unit SKU: 100-106018

Just for anyone who might be interested in ordering one I just got off the phone with Bobs and the gentleman I spoke with said the dimensions for the versa tilt and jac listed on there website for there versa tilt and jac are incorrect there dimensions listed in there additional info are as...

I ordered it knowing exactly what I was getting also ordered it on the notion that if they have been installed on gheenoes that a almost 16 foot aluminum boat would be just fine. I purchased this for my 25 horse mercury and the plate is rated for a max HP of 50. My mercury 25 does not have power...

Happy Memorial day to all. The reason for my post is I just recently placed an order for my bobs versa tilt and jac for my 2018 1546 Lowe. After ordering the unit I read bobs dimensions for the unit and they were as follows 23"x19"x12" so I pulled a tape on my transom and I have room but that...