Recent content by shawnfish

Wondering how high should the motor be on suntracker pontoon boat

Why are their yellow wire not connected

i don see it happening but ive seen weirder things happen......

its akward at first but you get use to it in no time. I will say the cable steer models are more responsive compared to the PD and terrova's electric steer. by responsive I mean u tap that pedal and there is no pause in the reaction.. the PD and terrova hesitate just a bit b4 responding to the...

good idea!

if you are using a 100$ eagle then the SI and DI will make a huge difference, no matter what your fishing for. and like the other poster ive never owned anything but humminbirds, I do know their customer service is second to none and their units are very easy to navigate the menu or user...

all I would do to winterize it is run it completely out of fuel (opinions differ but I pull my gas line at the dock and run it out gas every time I use it not just to winterize it) make sure the cooling system has no water in it and change my lower unit oil in case i have a bad prop shaft or...

the 95's have different intakes on the 20, 25 and 30-35hp models....

as long as the carb is off a 35 (wich it looks like it is but hard tellin without more pics) and your manifold is the same as the 35, slap it on there and you should be good to go... looks like the 25 carb is missing the slow speed needle....

besides gear and what not, what is the best way to locate panfish during early ice in a more or less featureless lake? (no real structure and limited cover ie.. trees) with an average lake depth of 10 -12 ft..

what year is your motor charger25?

depends on what year your motor is...

ok i may have read it wrong.... but your dead wrong about any cheap real is going to fall apart right away, I had some very cheap reels(like the 20-25 buck ones today) that were bought for me when I was very young and they lasted over ten years before they got donated.I still have two of them...

johnny25 gave me the idea about going from 25-35hp and he helped me out a lot with my questions etc.... so im gonna make a PDF file with all the part numbers and other information that is relevant to these conversions for motors from mid 70's through mid 90's..... I will post on here when im...

and your question about the lower holding up... yes, yes it will. the 50's thru 80's johnsons were built very very tough and the 25 lowers will handle the xtra hp, mine has with no problems whatsoever...no metal flakes in the lower oil when I have changed/checked mine....