Search results

Hey bud, great boat. I did a center console convert also. Check my profile for the build, it might give you some ideas for what you want to do. Best of luck with your project!!

Sweet build bud. I did the same thing by removing the middle bench seat. Be careful as removing the bench greatly reduces the structural integrity of the boat. Instead of wood I used 1/8" aluminum plate across the entire floor with rivits every 8 inches. It's a tank now, no flex in the removed...

It's for sale, just up graded! $6500!!

I found it, the boat is a 1973 Dixie Dory!!!

What's the reason for such a high sheer? Just to chop the waves better? Is this a good type of boat? Are they typically expensive?

I need help identifying the manufacturer of this boat. It's 16' Simi V, welded aluminum. There are no identifying tags. Thanks for yalls help!!

The 1/8" plate will do the trick. I'm 280 lbs and there is very little flex. I stand on mine all the time. Just make sure you leave the foam in under the seat for support. If not, you should add 1 1/2" angle cross supports. So the seat frame doesn't sag over time.

Thanks for the props bud! I'm glad my ideas can help others out!

Thanks you good sir, it was a labor of love to say the least!

Yes I did rivit to the existing front deck and removed the middle bench. I built the internal frame. The front seat is very sturdy as I added 1/8 plate across the entire front deck. The pictures give you the measurements you were looking for and how I ran the steering cable. I do plan to rerun...

Yeah, I should have went with red myself. The blues are just too much, I will more than likely change them out.

Check out my build. I did the exact same thing you're doing. It may give you some ideas.

I have a 14/48 1972 Quachita that I bought this January. I did a full restoration with a center console convert. Check it out on my profile! Fantastic boat you have there!

q No problem, I welcome corrective criticism! The reason for wood is I have no welder and to have it fabricated in this town would cost me an arm and a leg. The braces for the transom hold the current 25 Mercury with ease, in fact I looking to upgrade to a 50hp Yamaha and add pods. Pods would...

Duralux duck boat paint.

Painted the outside and got it registered for another 2 years! Ready to hit the water!

Nice work on the pods, I want to put some on mine but just to weld them on is gonna cost me 3 or 4 hundred. No telling what they want to fabricate them...

I agree with the wood comments. I made the same exact mistake. I recommend going to 1/8 Aluminum plate. It will never rust and last for the life of the boat. It will also reduce the weight significantly from using treated OSB. You will find out how top heavy and unbalanced the treated wood makes...

Thanks bud, it's been an awesome experience to say the least!!