Search results

The front and rear plates are 1/8" thick and sandwich 4 pieces of 1 1/2" tube aluminum stacked and welded. To secure it to the transom, the 1/8" plates are through-bolted with (4) 3/8" bolts that are 5" down from the top of the original transom. The motor that mounts to it is a 15hp Suzuki 2...

Well, you're saying I'm wrong and applying your logic to motors and boats with 10x what the OP is asking about and I have done with success. I do agree that using a jack plate on a 150-200hp engine is too much. But, why amplify the OP's question and lie about the results. The reality is that...

You guys are actually 180 degrees off and giving bad advice. In the OP’s case where a 6” taller jack plate will make the “thrust angle” too high isn’t wrong. The transom and motor are not levers. They are stationary objects. Due to how the boat sits in the water and where the propulsion of...

The battery up in the bow will distribute weight very evenly. To secure it, use a piece of 1 1/2" or 2" angled aluminum mounted low on the front seat. This will support the battery towards the rear and the front corners can sit on the hull. Also, use a battery box strap to secure it from...

After taking a year and a half off, we got the Lund back out on the water and my kids are more excited than ever to use it! It's so fun to see the excitement through their eyes. Ready for a day on the water. Happy to be out. Cleaned up and ready to go. Landed!

I've used a harbor freight one for about 10 years. I think I paid $60 for it. Both tires wont hold air at this point so I'll probably just replace it as opposed to replacing the tires. They are very useful.

In the chair up front. Thought about mounting it there but didn't want his legs to get burnt. Having it mounted to the front of the middle seat, he can lean forward and warm his hands but the heater is still a safe distance away.

While this isn't a huge modification, it is an upgrade that may give others ideas. My son (8) likes to go out with me but gets a little cold sometimes (he doesn't have built in insulation like me :lol: ). So, I was at my folks place last week and snagged their unused Mr. Buddy propane...

That's a good video. I would say a bimini top is a very underrated boat accessory. I've had one on my boat for years and it makes hot summer and wet fall &spring days very comfortable.

The motor won't care that the batteries are different capacities. As stated above, the motor will draw what it can and stop once there's not enough voltage. However, the charger is where you will run into potential issues...but there's a way around it. If charged together as one, 24v unit...

I bought a pair of clamp on Scotty Lake Troller's with 4lbs balls years ago and have used them off and on. They are a good size for some of the larger lakes around here. Now that I'm getting more into Kokanee fishing, I'm appreciating the downriggers more. Eventually, I'd like to convert them...

Agree with all the Lund responses. In the Pacific Northwest, Alaskan or Smokercraft are really nice boats as well.

Good thinking. I took my older boy once with my dad and the highlight of the trip was that Grandpa brought circus peanuts and small doughnuts. If they're comfortable, our lines are wet!!!

Not being a smarta$$ here but I am planning to get my boat in the water this year. My oldest son is now 4 and my younger boy will be 2 in April. I've had the boat out only a few times in the last 3 years so I am excited to start using it again.

Another trailer idea would be to buy a small 4'x8' utility trailer at harbor freight. you could use it to haul your boat and just slide it off at the launch. When you weren't using it for your boat, you could put sides on it and use it as a utilitly trailer.

I'd go for the 14' as well. Even with the boat being 1' less than the other, you have more square feet in the floor of the 14'. And, as said above, unless you're fishing some VERY narrow waterways, 6" would make the boat a lot more stable. One thing to consider too is as the higher you go...

It can be stored rearward and ends up about even with the transom. It works ok when running only a transom mount electric motor. If I'm running the gas motor, it sits on top of the motor and doesn't allow me to tilt it up very well. The forward position is really great because it leaves the...

No offense but your math is off by a whole dimension. When figuring volume as opposed to an area, its cubic inches, or feet....not square anything. Square is for an area. Also, your plywood, battery, and motor aren't neutral in water. Set your battery in water and see how it will act. My...

I've got an 8' Bimini on my Lund WC16 and love it. I use it in rain or shine. You can see in the below pic how it sits in my boat folded down. It does not obstruct any of the 3 bench seats. When it is up, it slides back and covers the rear 8' of the boat. It's tall enough for me to stand...

With wood and screws.