Search results

is that insulation foam board you used as filler between the ribs? if so how are the buoyancy properties of it? I thought of using it as floatation foam in my rig just not sure if its buoyant enough to be used for this purpose?

you would probably be fine on one side but if you are like me I like to overbuild everything so I personally would patch both sides.

8 to 12 depending on the load is what I was getting in my old 14 ft lowline.

they never came loose unless i wanted them too.

I do! while fishing i like my seat in the center while motoring (tiller steering) i like the seat slightly off set from center easier to control the motor for my long arms.

+1 fixed a few holes on my hull this way.

thats a killer night fishing lure

i use the stuff pretty much exclusively on all my spinning gear. I have rigs strung with 6lbs up to 20 lbs recently starting using the 20 lbs on my favored jigging rods which are baitcasters and it cast fine I love the added sensitivity and hook setting ability.

I fish the chompers on a 1/4 oz stand up jig head with a 6'6" or 7 foot cating rod in a medium heavy fast action tip. for line I use 12 or 14 lbs berkley XT more recently starting using 20 lbs fireline and im really liking it much more sensitivity.

right on! yea they've worked well for me ive been able to tighten them pretty tight dont know how tight others needed theres lol. But im also a bit of a bear so maybe Im able to hand tighten them tighter than others lol. Pliers on the wing nuts might give the leverage needed to tighten them for...

sorry about your friend I lost a good friend too 2 months ago he was just 41 had coronary complications he was too young IMO I miss him much wish his dad would give me his boat lol its a 2007 Triton. as for the small pin holes take a look at this stuff this might work for your application...

Im trying to go original with as little fabrication as possible. But Im having trouble tracking down original brackets its looking like I will have to fabricate my own. Thanks for the bench lengths! the fella I got my hull from did a POS bass mod and took the original benches out Im sure the...

the Pflueger criterion and templar are hard to beat. check'em out! I used to be all curados then I grew up and responsibilities took over. Now I have to be budget conscious I dont think you will be disappointed with either of these pflueger reels.

they'll hold up they just dont take abuse and neglect well... ive fished with my CS300 in 3 different states for multiple species of fish even some salt water fishing in the gulf of mexico its landed hundreds of fish some upwards of 25-30 lbs only had one piece break on it and it was my fault...

I have a corsair CS300 nice reel very smooth and casts far I have mine loaded with 20 and use it for striped bass and northern pike. I just dont think Id give 25 bucks a reel unless they are in like new condition! they were only 40 to 45 bucks new.

you can make your own fairly cheap. The ones I made for my trailer cost practically nothing I used scrap 1" angle iron, stud 2x4, pieces of scrap carpet and some miscellaneous hardware I may have 6 hours and 20 bucks in it.

where do you get those LED running lights? and how is the one on the bow attached? I was thinking magnetic then had one of those moments.... magnets dont stick to aluminum lol

i use one I think they are great never had an issue tighten it and never had it move unless I wanted it too. You are not thinking of attaching pedestal to it are ya? if you just mount a seat to it like I did it works fine.

I have a 1970 14ft mirrocraft deep v the benches have been removed I plan to remake benches for it can anyone tell me what the lengths should be of the bench seats? thanks

I need all 6 seat brackets for my 1970 14 ft mirrocraft boat. If anyone has any or knows where I can get them any help will be most appreciated! thanks