TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Jon and V Boat Conversions & Modifications
1990 Tracker TX-17 Toiurnament Rebuild
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="kofkorn" data-source="post: 377565" data-attributes="member: 7076"><p>If that big panel isn't the left leg of the console, then I don't know what it is. It looks very similar to the left panel under the console on my boat. Biggest difference is that the Pro-17 lower console is one piece, so the left and front lower panels are made together. Is it possibly a support for the extended deck?</p><p></p><p>Middle one is definitely a wire chase cover. This would allow you to route the wires from the back of the boat to the console. Separate harness than the motor/control harness. This one is most likely for your aftermarket electronics and wiring, fishfinder, extra lights, etc. It's probably mounted below the side controls somewhere.</p><p></p><p>Right cover is probably the cover for the steering cable. Again the one on the Pro-17 is different, longer and no taper, but it looks similar. Take a look here for wiring before I mounted seats and console. Big red cable is the steering cable.</p><p></p><p>Good luck!</p></blockquote><p></p>
[QUOTE="kofkorn, post: 377565, member: 7076"] If that big panel isn't the left leg of the console, then I don't know what it is. It looks very similar to the left panel under the console on my boat. Biggest difference is that the Pro-17 lower console is one piece, so the left and front lower panels are made together. Is it possibly a support for the extended deck? Middle one is definitely a wire chase cover. This would allow you to route the wires from the back of the boat to the console. Separate harness than the motor/control harness. This one is most likely for your aftermarket electronics and wiring, fishfinder, extra lights, etc. It's probably mounted below the side controls somewhere. Right cover is probably the cover for the steering cable. Again the one on the Pro-17 is different, longer and no taper, but it looks similar. Take a look here for wiring before I mounted seats and console. Big red cable is the steering cable. Good luck! [/QUOTE]
Verification
Post reply
Forums
Boats
Jon and V Boat Conversions & Modifications
1990 Tracker TX-17 Toiurnament Rebuild
Top