TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Jon and V Boat Conversions & Modifications
Derek's Tracker TX-17 rebuild
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Derek" data-source="post: 306916" data-attributes="member: 2615"><p>I used a Rule brand switch that I picked up at BassPro. I didn't take any pictures, but I mounted it on the starboard side adjacent to the live well pump. Mount it with the hinge forward and float facing back. I used epoxy to mount the base to the bottom of the boat. I tapped power off my 50A breaker in the rear of the boat and installed a 10A inline fuse. Then I soldered it into the existing wiring for the bilge pump. If your still putting the boat together and do not already have a bilge I'd just get a bilge pump with the float built in.</p></blockquote><p></p>
[QUOTE="Derek, post: 306916, member: 2615"] I used a Rule brand switch that I picked up at BassPro. I didn't take any pictures, but I mounted it on the starboard side adjacent to the live well pump. Mount it with the hinge forward and float facing back. I used epoxy to mount the base to the bottom of the boat. I tapped power off my 50A breaker in the rear of the boat and installed a 10A inline fuse. Then I soldered it into the existing wiring for the bilge pump. If your still putting the boat together and do not already have a bilge I'd just get a bilge pump with the float built in. [/QUOTE]
Verification
Post reply
Forums
Boats
Jon and V Boat Conversions & Modifications
Derek's Tracker TX-17 rebuild
Top