TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Boat House
Porpoising on re-powered boat. Need Advice
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="surfman" data-source="post: 357688" data-attributes="member: 7404"><p>The plate above the prop is the anti-ventilation plate, you can raise the motor until that plate is even with the bottom of the boat, it also looks like the transom on that boat has very little angle to it. That could just be the picture, also it looks to me like there is a trim pin in the lower hole, if this motor has hydraulic trim and tilt you don’t need that trim pin and I would remove it. When the motor is trimmed all the way down it should be at close to the same angle as the transom.</p></blockquote><p></p>
[QUOTE="surfman, post: 357688, member: 7404"] The plate above the prop is the anti-ventilation plate, you can raise the motor until that plate is even with the bottom of the boat, it also looks like the transom on that boat has very little angle to it. That could just be the picture, also it looks to me like there is a trim pin in the lower hole, if this motor has hydraulic trim and tilt you don’t need that trim pin and I would remove it. When the motor is trimmed all the way down it should be at close to the same angle as the transom. [/QUOTE]
Verification
Post reply
Forums
Boats
Boat House
Porpoising on re-powered boat. Need Advice
Top