Installing a raised floor in a 14' semivee. How to attach angle to ribs in the hull?

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

RaisedByWolves

Well-known member
Joined
Oct 7, 2017
Messages
721
Reaction score
75
Location
Bucks county PA.
Last year I picked up a 1980 Mirrocraft semi vee and Im getting around to adding a floor to mount pedestal seats rather than the benches.

I have bought some 1 1/4" and 1" aluminum angle and Im getting ready to cut it for the install but Im undecided on how to attach it to the hull.

Ribs are every 9-10" and I plan on using the 1 1/4" in the back to better support my svelte 300lb frame and do the rest with the 1" with 1/2" flooring through out.

What is the best way to attach?

Do I need mid span supports?

Special mounting base under the floor to mount the pedestal bases on?

This will be for a lake boat and I have purchased helm rated pedestals for both seats.
 

Latest posts

Top