Identify this boat

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Grouper242

New member
Joined
Oct 14, 2017
Messages
3
Reaction score
0
Location
The Bahamas
Hi all, does anyone know what brand this boat Is? And what size 2 stroke engine would you recommend? 30?

2eq6rg4.jpg


2l16rc.jpg


2re47f7.jpg
 
Every boat built after 1972 should have a HIN (Hull Id Number) on a plate usually affixed to the upper right corner of the transom, looking from the back, with the boat upright.

richg99
 
Thanks for the help, I'll try get better photos and a look at the number when i go back to look at it.

What type of speed should I see with a 40hp 2 stroke tiller (yamaha enduro)?
 
Grouper242 said:
Thanks for the help, I'll try get better photos and a look at the number when i go back to look at it.

What type of speed should I see with a 40hp 2 stroke tiller (yamaha enduro)?

26.35mph
 
I have no idea, it is some sort of bracket on both sides. Maybe for a canopy over the windshield?

You dont think it could go over 30knots with a 40?
 
Grouper242 said:
I have no idea, it is some sort of bracket on both sides. Maybe for a canopy over the windshield?

You dont think it could go over 30knots with a 40?


I'm betting you'll get at least 30 MPH with 40 ponies.


CMOS
 
VinTin said:
Looks like an AlumaCraft Deep C rated at 60hp.

Better photos would be nice.

Definitely. Year, not to sure, but sometime around ‘57.

I have a ‘57 Deep C and it looks nearly identical from the pics.
 

Latest posts

Top