Twister The Short Longtail

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Our latest product is an 8 to 16Hp Twister kit.

We anticipate delivery of our first consignment in approximately 8-12 weeks. Cost set @ $595.00

The Twister XL has the added feature of a left or right hand Z bend handle. The shaft is about 10" longer than the existing Twister Medium, because the Bowden cable is stronger.

Get the Mud-skipper 16hp electric start engine too.
https://mud-skipper.com/index.php/motors/mud-skipper-16hp-gasoline-engine.html

PM me if you'd like to reserve a kit.

Pictures soon!

Thanks
 
mud-skipper said:
Our latest product is an 8 to 16Hp Twister kit.

We anticipate delivery of our first consignment in approximately 8-12 weeks. Cost set @ $595.00

The Twister XL has the added feature of a left or right hand Z bend handle. The shaft is about 10" longer than the existing Twister Medium, because the Bowden cable is stronger.

Get the Mud-skipper 16hp electric start engine too.
https://mud-skipper.com/index.php/motors/mud-skipper-16hp-gasoline-engine.html

PM me if you'd like to reserve a kit.

Pictures soon!

Thanks

16 HP @ 4K RPM, how's it on fuel, seems a very low RPM in todays market, no? (Not that that's a bad thing, 16 HP or max HP at a lower RPM is a good thing.
 
Crazyboat said:
16 HP @ 4K RPM, how's it on fuel, seems a very low RPM in todays market, no?

The4 stroke motors that are used for these kits typically have an RPM range from 3000-4000 rpms. (Normally 3600 is where most of them are governed, unless a performance kit is installed) so this is normal.

These mud motors are the best bang for your buck IMO. Great products and service.

I am EXCITED to hear about the twister being made for the larger engines. I think I have a 16hp Honda in my near future!!
 

Latest posts

Top