Primer On Old Outboards

Have a question about your motor? All motor talk and questions go here.
JODGW1776
Posts: 12
7

Primer On Old Outboards

Post by JODGW1776 »

Hey how's that Johnson 6 horse treating you?

Mojo^
Posts: 169
8
Location: Middle Georgia

Primer On Old Outboards

Post by Mojo^ »

For those of you wanting to refinish you motors, I highly recommend Moeller Marine Motor Spray Paint in the rattle can. The colors are true to the original and it goes on smooth as silk. It has a high volume of acetone and MEK so it dries very fast allowing you to re-coat almost immediately without fear of runs or sags. Last weekend I refinished my 1997 Johnson 25 hp. and was able to apply four coats of paint followed by four coats of clear lacquer topcoat in about two hours. This stuff is nothing short of amazing.

leec12
Posts: 2
5

Primer On Old Outboards

Post by leec12 »

Looks good, those are pretty bullet proof if you look after them.

User avatar
RiverRoost
Posts: 2
1
Location: Southeast Oklahoma

Primer On Old Outboards

Post by RiverRoost »

Thanks for the post. Good information.
“It wasn't raining when Noah built the ark”
~Howard Ruff

Post Reply