Does anyone have their fish finder in a case ?

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

steve185

New member
Joined
May 23, 2013
Messages
3
Reaction score
0
Location
Moncton, New Brunswick
Looking for some ideas for my fish finder. I want to mount it is a case so I can easily remove it from my boat and keep it protected?
Anyone have a setup like that?
Thanks
Steve
 
No, I don't have that setup but something like this would probably work pretty good.

https://www.harborfreight.com/catalogsearch/result/index/?dir=asc&order=EAScore%2Cf%2CEAFeatured+Weight%2Cf%2CSale+Rank%2Cf&q=apache

63518_W3.jpg
 
Take a look at the following link. Might be something you could use.

My new (semi-)portable sonar/GPS

Oops, if that link doesn't work, maybe try this one:

https://www.tinboats.net/forum/viewtopic.php?f=5&t=44314&p=449317&hilit=portable+gps#p446195
 
I keep my helix and my I pilot remote in a pelican waterproof case . They are not cheap , but neither is what’s in it . Harbour freight/ northern have similar cases . The best protection you can get in my humble opinion . Have not cracked a screen yet and have been doing it this way for years.
 
I did when my boat was down I have a bow mount 360 mounted on a trolling motor bracket hung on the transom of a rental boat . I just left my helix laying in my case . Not very secure but..... well I was hard up to go fishing. Lol you know withdraw!
 
Yes I have a Garmin in a case with a 12volt sealed battery. I also use a Tite-Lok portable transducer bracket. Works swell.
 

Latest posts

Top