Anyone use a Teleflex Seastar Boat Steering System QC Rotary on a '57 Alumacraft Deep C? The dilemma is that the Dash Mounting Template requires 3 and 3/4" and the Bezel requires 5 and 1/8" . I'm limited with my dash size (see photos).
Any helpful hints would be greatly appreciated!
This is what I used. The self-etching primer is from O' Reilley's and the paint is from Tractor Supply. No time for West Marine !
My Shark Boat got the same treatment; scrub, pressure wash, acetone wipe down, self-etching primer, then Rust Oleum Gloss Smoke Grey. I painted that boat in June...
After months of minimal progress, I'm on a roll now. The boat was a barn find from South Dakota and imported to my swampy homeland. Hoping to have it in the water within a month. The first photo is the one that set the hook into me. It didn't look that bad, but when I started to dig into it...
I scrubbed, pressure washed, and wiped the bottom of my '57 Deep C with acetone to make sure it was absolutely clean. Then I hit it with self etching primer, which is vital if you really want the top coat to stick. The finish hull coat is Rust Oleum Ford Tractor Blue.
Santa got me a new Suzuki DF25A ! The boy helped me with this one by asking the Mrs "remember when me and Dad got caught in a thunderstorm because his old motor wouldn't start?'
This is what I used on my '65 Dura Craft:
https://www.oreillyauto.com/detail/c/aircraft/paint---body-repair/paint-prep/paint-remover---stripper/1f8bf1a686e8/klean-strip-aircraft-1-gallon-1-gallon-paint-remover/kln3/gar2000
After that Aircraft Stripper removed the old layers of paint, I hit the...
Leesville ? We're practically neighbors! Thanks for the input, greatly appreciated. I think I'll give cypress a try because the boat lives in the garage and will hit the water every so often. I can get cypress locally too.
Does anyone know the type of wood they originally used for these boats? Mine definitely needs to be replaced, and I want to do it the right way the first time. Thanks !
According to the original sales brochure, my old Deep C weighs in at 276 lbs. Do y'all think a 1998 20 hp Johnson would be enough horsepower? As long as I could go 25 or so mph I'm happy. Thanks !