Bantou

SeaArk has several bench style jons in their catalog. I don’t know how often they produce them though. Based on the other stuff I’ve...

Where did you find parts? I have an 88 Johnson 15hp and finding some of the parts has been a real bugger.

Unless you a worried about looks, you don't need to paint aluminum. It is self protecting and doesn't rot away like iron or steel. It...

Yes, you want the bunks to stick a couple of inches past the transom. Otherwise, the bottom of the hull will eventually bend where it is...

If I decide to get the Big Fisherman that I’ve been eyeballing, I might dedicate the 15hp to it and build a mud motor for the 1664. Just...

The hubs won’t tighten up anymore. When I pulled the old hubs, the back bearings were just about seized up. I’m assuming they wore the...

It’s actually still solid. If it weren’t for the spindles, I’d hit it with a rust stopper/preventer and leave it alone. The rust is...

New axle has been ordered. Naturally, the trailer has a weird spring spacing (47”) so I couldn’t just pick one up from TSC. I had to...

Thankfully, we don’t deal with thick fog here very often. During the early spring and late fall, we might have a couple of inches of...

The trailer frame was hot dipped and is actually still in good shape. Pretty much everything else is rusted to one degree or another...

Photos of axle and spindles

Without knowing exactly what breaker you have, it's hard to say for sure. However, the VAST majority of non-gfci breakers are just...

My memory sucks... the axle is a piece of upside down c-channel approx. 2"x3" with the spindles welded inside the channel. I don't have...

I don’t see why it wouldn’t. The wire doesn’t care which way the electricity is flowing. As long as you are feeding hot to hot and...

If you do this with your house, TURN OFF YOUR MAIN BREAKER. If you don't turn the main off, you will back-feed the entire neighborhood...