Battery, circuit breaker and fuse box will be in close proximity to each other with the battery also in its own secured dowb box - everything will then be inside a larger aluminum box that is already on the boat.
I just figured I would add the single circuit on/off switch so it could be placed...
The boat is a 16ft Alumacraft. The battery is approx 3ft from the motor.
The motor cables don't have a AWG size on them.Infact they have no labeling whatsoever. I am guessing they are 4awg because they are slightly thicker than a 6awg cable I have (compared them next to each other the Mercury...
I am about to wire everything up and wanted to know if the basic electrical diagram I created looks correct (never done this before). Are the wire sizes correct?
I have a combination battery starter/Deep Cycle - kill switch - fuse box - switch panel - and just simple accessories to connect to...
H.Depot only has the 1" pink board so I got this 2" from Lowes (the guy said it was closed cell).
And I am recycling some aluminum ladders as extra support lol
With the price of aluminum these days is the use of flotation foam as a floor support advisable? (only poured in specific places).
I also have 2" insulation foam board that I was planning in placing between the ribs.