Recent content by Eoughphily

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Eoughphily

    Blue sea add a battery

    I found my problem. I had the ground and starter isolation backwards. I've got the green blinking led every 15 seconds now indicating it's in standby mode.
  2. Eoughphily

    Blue sea add a battery

    Not a dumb question as it is kind of hard to tell in the pic. The positive and negative are separated. I attached a photo with the cover off.
  3. Eoughphily

    Blue sea add a battery

    I installed a blue sea add a battery switch + acr a while back. I set everything up based on the diagram that came with it. It seemed like it was functioning, at least nothing smoked or caught on fire when turned on. It wasn't until later on I realized there was a status led but whether its...
  4. Eoughphily

    90hp mercury popping/misfire on idle

    I'm thinking the issue may be ignition related. I did some further tests on the stator and trigger. I dont have a dva adapter yet for my voltmeter, that will be arriving on monday. Below are the ohm readings i got. Serial number 0D028331 Trigger Range is 800 - 1400 Wht/blk to brn 1216...
  5. Eoughphily

    90hp mercury popping/misfire on idle

    have a new to me boat I purchased with a 1991 mercury 90hp outboard. When I start it up, it seems to be misfiring/popping and will not idle. Once it gets below 1200 rpms it starts to shutdown. I cannot get it to idle long enough to put in gear when in the water or under load. Sometimes I can...
Top