harve131

Yeah I would never use flex seal, too much work to waste on that. Definitely going to gluvit the whole inside as well. Thanks!

Gluvit goes on the inside, not the outside. Your choice on what to use, but flex seal does not have a good reputation for long term use...

Having had both painted and unpainted hulls, my vote would be for the painted. Much easier to keep clean and you won't see the natural...

Okay that's what I like to hear. I just want to paint the sides like the new bass trackers have. I also would not mind buying a roll of...

I need some advice I am at the stage where I have to decide if I want to paint or leave bare aluminum. I really like the gloss black...

I install all new rivets on the keel most were loose. I dabbed 3m 5200 on rivet and smashed them in with airhammer and bucking bar...

You might want to re consider the flex seal....long term reports are not that good. More of a quick temporary fix. Many better...

I am currently working on an 85 Lund. My rivets all look good but I am going to coat the entire floor with Flex Seal before I replace...

I would seriously consider coating the inside with gluvit or other sealer before adding any interior. Tighten your rivets first, the...

No sorry. I'm not the guy to ask about rivets. I do know if installed properly they should last years.

Buck any you don't like and replace any that have discoloration around them. That discoloration is often corrosion that has crept...

If you are only capturing the last 2 foot or so of the rod, look at those golf club protector sleaves. They are black and have a...

Should I replace more of them. They seem to all be tight. Should I continue to seal rivet with 5200 and then gluvit the inside?

Hi Everyone, I just wanted to see if anyone had advice on things to do or not to do. I rebucked some rivets and they seem to be sealed...

Sealed with 5200 and installed new solid rivet, hopefully it will last for years.