LukeH

Thank you so much. Very helpful

Freaking gold right here man. Insane. Thanks so much

Copy on 24:1 thank you I made sure the plugs were grounded to the block when i checked spark Are the points supposed to be open or...

I checked with a multimeter and I have continuity from the primary and secondary windings off the coil all the way to the center...

understood. thank you for the clarification on this. very helpful

Understood, thank you for your reply. I will use combination ohmmeter and richards tool and .020... im sure that will land some good...

Ack. Thanks. Is the IDEAL end result always .020 no matter the method?

yeah i have the points tool from richardsoutboards.com. But i also saw people using the .020 feeler gauge method so if less than .020...

Hello there, please link the thread to this if it already exists. Regarding: 1962 evinrude 18hp fastwin points gap setting My evinrude...

@Pappy you are the fricken man. Solved it. It was the plate with the curved slot + square nut behind. See picture. I had to adjust that...

@Pappy Which screws specifically in this picture?

Thank you for the reply. - yes made sure the fulcrum screw is in place. Like i mentioned, i can currently verify the gearcase is working...

Good morning, I have been working on rebuilding this 62' evinrude 18hp and am running into 2 issues: 1) I finished connecting the lower...

hey Adam_Mac84- you still monitoring this?