Kipawa Trolling Motor Prop Review

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Thanks a lot now I got to order one. I duck hunt in place where you can only run trolling motors.


Sent from my iPhone using Tapatalk
 
Well guys, I got out for a couple of hours this morning. As you may recall I'm running a Minn Kota 55 lb. Endura on a 1648MV. I fish total electric 95% of the time. I don't troll. I move from place to place and fish anchored. With the wife and I and our gear the top speed on GPS with the stock prop is between 3.0 and 3.2 mph. With the new prop it was between 2.8 and 3.0 mph. Yep I actually lost top end speed a bit with this prop.
Why? Don't know. I've run the other prop since 2011 and the performance is very consistent. I ran off of 2 fully charged deep cycle batteries, same as always. There was no wind this morning so that wasn't an issue.
The prop ran smooth and seemed to have less vibration than the stock prop at speed. It has to be that my particular setup just doesn't benefit from this prop.
 
I did not see any difference in top speed either - but I wasn't looking for that. The stock prop felt like it had an exponential increase in power output from about speeds 3 -> 7 and with the 3 blade the incremental power increase feels much more linear & there is more power put out lower in the speed settings (speed 2 is now useful on extremely calm days for creeping along the shoreline with the 3-blade vs the OEM prop.)

I didn't think anyone would be expecting a higher top speed by switching from a 2 blade to a 3 blade setup, even with the slight decrease in blade circumference.
 
onthewater102 said:
I didn't think anyone would be expecting a higher top speed by switching from a 2 blade to a 3 blade setup, even with the slight decrease in blade circumference.

Why?
 
Generally speaking fewer blades with props = higher top speed, I don't see why it would be different with an electric trolling motor.
 
Then why do I see racing props with 4 blades instead of 3? Just an observation when I was looking for a spare prop for my optimax.

Sent from my SM-T310 using Tapatalk
 
Uhg, this does not handle milfoil well. Just got back from a weed choked pond that is overtaken with milfoil growing straight to the surface, and even an isolated stalk would choke up this prop.
 
sounds like all hat and no man. been reading bout the miracle props. was waiting on honesty. this thread is all about honesty. thanks yall!
 
Thanks a lot now I got to order one. I duck hunt in place where you can only run trolling motors.


Sent from my iPhone using Tapatalk
seriously? you duck hunt in your neighbors pool? roflamo. i never heard of such. please tell us the reasons.
 
seriously? you duck hunt in your neighbors pool? roflamo. i never heard of such. please tell us the reasons.
Way to dig up an old post. It was an Army Base and they got all kinds of rules. It’s no different than the refuge I moved near. Some of the lakes are gas and electric, some are electric only and some are no motors at all.
 
we cant respond to an older post? i was old when it was new! i was amazed when i read that. where im from, duck hunting with an electric motor says you will either get eaten after you run out of battery, or you are a youtuber and shouldnt really be there. i guess if you just shoot ducks for the fakebook pics, they are mallards and you can just sit in the car at tthe park and shoot.
 
Thanks for your post Jonah. I'll be looking for one of these before the day is over. I'm in agreement that MinnKota is missing the boat on their props..
 

Latest posts

Top