CalicoJack
Active member
- Joined
- Jan 15, 2023
- Messages
- 44
- Reaction score
- 11
- LOCATION
- Port Orange, Florida
TinBoats.net
The original aluminum boat site!
Gluvit epoxy
- Thread starter CalicoJack
- Start date
Help Support TinBoats.net:
- Joined
- Feb 18, 2009
- Messages
- 1,844
- Reaction score
- 1,498
- Location
- Perrysburg Ohio
- LOCATION
- Perrysburg Ohio
You need room to mix in the second component. Most two part coatings are sold by quantity, such as a gallon which means two gallon cans each half full to allow mixing.
- Joined
- Oct 1, 2011
- Messages
- 450
- Reaction score
- 229
- LOCATION
- SoCal
Did you receive the second container, which is the catalyst? If so, i catalyst is mixed in this can, hence, why it is 1/2 full. If not, then you only received 1/2 the product.
I agree....it is NOT cheap! Therefore, only mix what you need according to mixing ratios, which if I recall, is 5:1 (resin:catalyst).
I agree....it is NOT cheap! Therefore, only mix what you need according to mixing ratios, which if I recall, is 5:1 (resin:catalyst).
CalicoJack
Active member
- Joined
- Jan 15, 2023
- Messages
- 44
- Reaction score
- 11
- LOCATION
- Port Orange, Florida
Yes, I received the two containers. I was just stumped when I opened the can.. I thought they had run out epoxy and sent me what they had left lol
