Search results

Thin coats for vertical surfaces, use a short nap roller (1/8" nap), tip with a brush if necessary. This stuff has a tendency to self level. Just roll it very thin and let tack up if another layer is needed.

Yes they are, the main thing is prepping it right. No dirt, oil, sand surface, wipe clean.

Not at all Fasco is an Epoxy Product Company www.fascoepoxies.com Jasco is a solvent/ cleaners/ strippers products company. www.jasco-help.com

https://fiberglasssupplydepot.com/Fasco-Epoxies.html We are one of the largest distributors of Fasco products. We can answer all your questions about Fasco.

A gallon will do about 100 to 120 sq feet.

All the Fasco products that you can buy online. Fasco does not do online sales. We are the main distributor for Fasco online. https://fiberglasssupplydepot.com/Fasco-Epoxies.html

10% off your entire order of $50.00 or more Coupon good for September 2015 Coupon Code: tinboats Make sure to register before checking out so you can earn points and use the coupon code. https://www.fiberglasssupplydepot.com

Hi Ramrod, Ive never seen anything special about gluvit except that it is a little thinner than the average epoxy's and the price. All epoxy's stick to properly prepared aluminum and most all epoxy's are flexible at least to a an extent, there are epoxy's on the market witch are more flexible...

Check out the new wrap your *** in fiberglass shirts. Free shipping on all shirts. https://fiberglasssupplydepot.com/T-Shirts.html

Bostik 920. Works better then the 3m products. https://fiberglasssupplydepot.com/BOSTIK_920_10_OZ._TUBE.html

Yeah the older foam used to soak up water real quick. The new stuff doesn't soak it up quite as fast but if it stays wet long enough it will eventually soak up water too. Hope that helped a little thanks

If you check out fasco steelflex superslick 2000 this product is the original of the coatings. It contains a silicone to help the bottom of air boats to slide well. Plus it is not 200 a gallon. Check it out at this link https://fiberglasssupplydepot.com/FASCO-Steelflex-Super-Slick-2000-.html

If anybody needs any steelflex check out my website we have been selling fasco products for about 25 years. Also if anybody has any questions about any of their products let me know and I'll help you out. Thanks Jesse

Yes that's us we are in Fort Pierce still.

I agree aluminum is very tough itself. The steelflex wont chip off if everything is preped right but if you don't have any holes then bare aluminum is tougher then anything. Remember anything that is a single part won't hold up like a two part paint. If you are going to be dragging the boat I...

Anyone looking for Fasco steelflex we carry this product. A gallon does about 120 sq feet.

Field tested on thousands of airboats in the Florida Everglades for over 37 years. Super Slick is an Epoxy Coating unlike other competitor coatings. Super Slick surface contains teflon plus additional friction reducing additive. Same Steelflex toughness and durability proven on airboats since...

Jim is right about the manufacture of the boat has to put foam in a boat that is 21 feet or less. Its uo to you to decide how much foam you want to put back in the boat. I would prbally advise on putting back what you removed. On a aluminum boat what I would do different once I take out the old...

Hi and thanks for letting us come on board with this great forum. For the month of March all orders of $50.00 and up will recieve 10% off. Just use coupon code tinboats.net when checking out. Also if anybody has any fiberglass related questions please let us know and we will do our best to...

It seems like you are on the right track. The first thing to do is remove all the old paint that is on thier because if you don't no epoxy will stick to it. I see you have started do already do this. As far as the holes go you could patch them with a little cloth and epoxy. This method works...