Search results

I have the 9.8 Tohastsu on my 1436. It is a sweetheart of an engine. The boat is mildly modified, but I fish solo, so I'm probably lighter than a stock boat with two people. I got 21 once but normally Max is 19-20 mph. I first had a Tohastsu 5hp with a 6hp carburetor. Max with that engine was...

Dad used to say thin skins and thick heads go together! That being said, thill has the perfect perspective on this.

The Epoch 12V 50AH was going for $199 when I was in they site the other day.. Hard to beat that if you want a Marine battery for any type open boat.

I am posting this as a resource to others that may follow me. My Jon boat conversion project is pretty much complete and I've been tuning for max speed, as I live on a large lake. I purchased a 2020 Tohatsu 9.8 four-stroke locally. There were some issues with a dirty carburetor, but once...

Are those mounting feet I see on the charger base? There have been inconsistent reports on the body of the charger they are sending out now. Since the charger is engineered to be mounted in the same environment as the battery, it would make sense if there were cast-in lugs to fasten the...

I think that as long as you follow proper charging practices and keep it from freezing that you'll be happy. I still kept a relay on my setup since the battery can provide a lot more amps than the TM motor can take. Good luck!

My 1436 started out with a 6 hp. It would barely do 11 mph. A tach, two props, and some rearranging and it would do 14. You want to be on plane at the upper end of the rpm range of the engine. It could be that you have one prop for loaded down, and a different prop for running light. Tilt pin...

Check out this information on the Epoch site. I think it will help. Look at the bottom of the page for the recommendations, although the entire article is useful info. https://www.epochbatteries.com/pages/best-trolling-motor-battery

The Epoch site had it on sale for the fourth of July. It is back at 299.00. if you subscribe to their news letter they will send you a discount code. I paid about 297 shipped with the code and received the battery the day after I ordered it. They also offer discount codes via Facebook. For me...

I will say that it has been a long time since I have trusted Amazon reviews, especially since they started the third party sales. That being said, I think that a good number of the batteries available are good enough for our purposes. I've spent so much on my boat, motor, and fishing gear...

I might also mention that the battery I purchased is now only $250.

Just an update on my Epoch 50AH in my 1436 Jon. I have an Edge 45 trolling motor. I have fished over six hour and still show 80% remaining capacity. My speed on forward 1 is almost too fast for me now. Forward 5 is very fast. Losing 40+ pounds and hiding the battery under the casting deck...

It also comes with a hardwired gauge that gives you an real-time visual check on the remaining capacity. I'll mount this where it is easily seen from the casting deck. The only real negative is that they package the 50AH, 100AH and 200AH in the same case. It will fit under my casting deck...

I just picked up an Epoch 50AH Marine battery. It has all the bells and whistles. I'll keep the thread informed as I install it in my 1436 Alumacraft. 12V 50Ah Marine Battery - Lithium Trolling Motor Battery

I used the FRP/polystyrene composite from my thread where you asked a question. It is flush with the middle seat and runs to the bottom of the lip of the front seat/deck. So my deck is on plane with the middle seat, giving me the longest run of deck that is flat.

This is how I transferred vertical loads to the seat. I trimmed the. 2" angle height. This was riveted to the seat lip. I then used angle stock to accomplish what LDUBS is illustrating. It is solid, and pretty fast to do.

Some really easy storage to access is under the front deck of your boat. If it is similar to my Alumacraft, it is open, and not filled with foam. A quick Amazon hatch and you have an easily accessible, pretty dry area. I keep my paperwork, and bags of plastics in this area...

I think that it could work well with some additional supporting structure. My goal was to have as little supporting structure underneath as I could get away with. It is all built with 2" angle of 1/16" aluminum from Lowes. Very light! I actually believe I have more than double what I need...

Ok guys and gals. It was a long time getting on the water, but well worth it. The new casting deck works fantastic, and is solid as a rock. This is my first bass on the upgraded Alumacraft 1436. Topwater off a deep point! A great way to start the season. I only lost about half a mile an...

I used medium epoxy when I made up some frp and polystyrene foam board composite. I am thinking that for this application you may want to use some 3M auto body panel adhesive. It will never let go, and comes in a cartridge for easy application. Not especially cheap, but it is all business. I...