• If you have bought, sold or gained information from our Classifieds, please donate toTinBoats.net and give back.

    You can become a Supporting Member or just click here to donate.

10.25 x 15P 3 blade stainless 13spline prop

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

onthewater102

Well-known member
Joined
Mar 15, 2014
Messages
2,266
Reaction score
2
Location
CT
uvpAL19.jpg

1bvWbDL.jpg

lVLraZV.jpg


Original quicksilver part # is 48-76232A-4 15P Fits both my '88 2 stroke Mercury 60hp and my 2020 Yamaha F60, both of which have 13-spline shafts. Runs 5300 RPM on the F60 with a light load in the boat. Uses a pressed in hub. $100 + actual shipping cost to you.
 
Now sold as the Vengance model of propeller as 48-855862A46 which is the successor to p/n 48-76232A-5 which replaced the older p/n of this 48-76232A-4. All the same specs.

It fits my 2020 Yamaha F60, as well as the 84-96 run of Mercury 60hp 2-strokes that I'm personally aware of, though it's listed as an option for a variety of motors here: https://boatpropellers.iboats.com/Mercury_Marine-Vengeance-Propellers/48-76232A5/

No nicks or damage to the prop, hub is solid (not spun). Ready to throw it on & roll.
 

Latest posts

Top