jaygib9
New member
PRICE IS FIRM ! Location is New Albany, Indiana. This listing is for a 2006 G3 2072 Outfitter with a Yamaha T60TLR (power tilt/trim). Selling to pay off debt. It's a Mod V flat bottom. Trolling motor is a 2007 55 Pound Thrust V2 54" with 3 Rural King 12V 100 Ah deep cycle batteries. Garmin UHD 93SV fishfinder with GT54 transducer & Epoch 50 Ah Lithium battery. There's a set of Cannon Magnum 10 electric downriggers with 10 lb weights. It has a Monster rod rack on the back with 6 Monster 33/45 rod holders. There's a set of Mul-T-Bars on the front corners with 4 Monster 33/45 rod holders each and cup holders (14 rod holders total). There are Black Oak LED flood lights on the front. There are 6 Tempress ProBax Orthopedic Limited Edition seats (Charcoal/Gray/Orange, 2 still in boxes). Had a tune up last year and water pump replaced. I've added a video of the boat and all the parts I've purchased for the boat (over 23K so far). The trailer was upgraded with a new Dexter axle, has 3 nearly new tires, upgraded safety chain, 2 speed 3200 lb winch, upgraded straps on back, Drotto, Reese jack, C.E. Smith 40" guide ons with light.
All the parts purchased for future install on the boat will be included: Piano hinge for making rear bench a storage area, all wiring needed to redo entire boat, 2 Black Oak spot lights, Monster bait cutting station for center of the rod rack on the back, 3 new seat mounts (boat side), life jackets and throwable (required on 20' boat), fire extinguisher, throwable floating ring with rope, Yamaha tachometer and both cables required to install it. 22 gallon Moeller above deck fuel tank (made for Boston Whaler boats, was going to move rear bench forward 1 foot to make room), Botepon lights, extra prop hardware kit and old prop as spare, SeaArk bow step with storage, Monster heavy duty 4 bin sinker station.
Price is $2,000 lower than what I was going to ask because the bottom of the skeg (a couple inches) was broken off on a rock in the river. Boat still works fine. Lower casing only is around $1,000, entire lower is around $2,000.
All the parts purchased for future install on the boat will be included: Piano hinge for making rear bench a storage area, all wiring needed to redo entire boat, 2 Black Oak spot lights, Monster bait cutting station for center of the rod rack on the back, 3 new seat mounts (boat side), life jackets and throwable (required on 20' boat), fire extinguisher, throwable floating ring with rope, Yamaha tachometer and both cables required to install it. 22 gallon Moeller above deck fuel tank (made for Boston Whaler boats, was going to move rear bench forward 1 foot to make room), Botepon lights, extra prop hardware kit and old prop as spare, SeaArk bow step with storage, Monster heavy duty 4 bin sinker station.
Price is $2,000 lower than what I was going to ask because the bottom of the skeg (a couple inches) was broken off on a rock in the river. Boat still works fine. Lower casing only is around $1,000, entire lower is around $2,000.
Attachments
Last edited:
