Adding anchormate mounts. Latest boat mod through the garage

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

sparkbr

Well-known member
Joined
Jan 19, 2009
Messages
179
Reaction score
1
Location
Peoria Illinois
So this is my latest boat mod. It's a brand new Weldbilt 1652. The guy wanted two platforms to mount two anchor mate powered anchor winches from. This is how it turned out.

102_0777.jpg


102_0772.jpg


102_0771.jpg


102_0774.jpg


102_0780.jpg


102_0779.jpg


102_0766.jpg


102_0769.jpg


My house is starting to look like a boat dealership between my boats and the one's I'm doing work on.

102_0783.jpg
 
ober51 said:
You don't realize how big that boat on the far right is until you see the small jon INSIDE it, haha. Great job.


Lol, Yeah, alot of people kind of have that reaction when they see it in person for the first time. The boat inside is a 1436, the big one is a 2476.
 
Nice work. Side work like that is what I hope to start doing a little more in the coming future, and once I log a few more hours on the aluminum MIG machine, I should be able to pick up a few welding jobs. My yard is looking like that too. Well, except for the fact that a lot of the boats aren't on trailers, and they are limited to the driveway due to the steepness of the yard, and my driveway is a little smaller than your yard.....
 
sparkbr said:
Thanks everyone.

You do some nice welding. Just a short point but maybe I'm to late. I mounted mine similar to yours. Then I read the instructions. They said that the anchor receiver arm needs to be 6" out from the boat. Mine kept catching and banging on the boat as I brought it up. Moved it out the 6" and it's much better. I do switch anchors a lot. 15# to 30#. Mushroom and River. Love them to death!! NOW! :wink:
 
sparkbr said:
Lol, Yeah, alot of people kind of have that reaction when they see it in person for the first time. The boat inside is a 1436, the big one is a 2476.

Holy cow! That looks like a nice fishin' barge, it carries its own 14' dingy!
 
dunk50 said:
sparkbr said:
Thanks everyone.

You do some nice welding. Just a short point but maybe I'm to late. I mounted mine similar to yours. Then I read the instructions. They said that the anchor receiver arm needs to be 6" out from the boat. Mine kept catching and banging on the boat as I brought it up. Moved it out the 6" and it's much better. I do switch anchors a lot. 15# to 30#. Mushroom and River. Love them to death!! NOW! :wink:


Thank you, I just had the winch and pulley sitting there for the picture. The guy who owned the boat wanted to mount them himself to save some money on the labor... Good eye though.
 
RBuffordTJ said:
sparkbr said:
Lol, Yeah, alot of people kind of have that reaction when they see it in person for the first time. The boat inside is a 1436, the big one is a 2476.

Holy cow! That looks like a nice fishin' barge, it carries its own 14' dingy!

Lol, yeah, it's un-goddly stable on the water. I can even put two picnic tables in it with room for people to sit on em comfortably.
 
sparkbr said:
Lol, yeah, it's un-goddly stable on the water. I can even put two picnic tables in it with room for people to sit on em comfortably.

Where did that come from or is that a build of yours? I almost want one. Well I do but there is the little matter of cost...lol.
 
RBuffordTJ said:
sparkbr said:
Lol, yeah, it's un-goddly stable on the water. I can even put two picnic tables in it with room for people to sit on em comfortable.

Where did that come from or is that a build of yours? I almost want one. Well I do but there is the little matter of cost...lol.


Post up some more pictures of the Barge, that sucker is cool..

I did build the barge. I designed it to float 10,000lbs of fish along with 4 guys, 60 gallons of fuel, nets, motor, ect. Rigged it weighs right at 2000 lbs and drafts only about 3-3.25" empty.

0e285c44.jpg


7b59df89.jpg


0235565d.jpg


f7b22320.jpg


9624400c.jpg


43247da2.jpg


34864a75.jpg
 
your old ladys gonna get pissed when she finds out you been out on the lake w/ her kitchen table chairs lol :wink:

sweet job thats a tank

you comercial fish?
 
Loggerhead Mike said:
your old ladys gonna get pissed when she finds out you been out on the lake w/ her kitchen table chairs lol :wink:

sweet job thats a tank

you comercial fish?


Thanks Mike. Yeah, everyone here at work gave me a bunch of crap about the chairs too. lol.

I built the boat to commercial fish asian carp, but have yet to set the nets out of it. I seem to always be busy with some sort of project it seems. I'm hoping to get a little more free time in the fall and finally get that thing full of fish... Hopefully.
 
Top