alumacraft 1648

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

joseph101088

Well-known member
Joined
Mar 29, 2012
Messages
164
Reaction score
1
Location
Buckeye az
finally got my new 1648, it came with a 4 horse yamaha and road king trailer. took it out twice today once fishing and once to break in the new motor.
 
Congrats on the new boat. =D> Enjoy it.
That's the one I hope to pick up next year.
 
[url=https://www.tinboats.net/forum/viewtopic.php?p=321467#p321467 said:
Kilo70 » Today, 14:25[/url]"]Congrats on the new boat. =D> Enjoy it.
That's the one I hope to pick up next year.

its been great so far i would recommend it. had three kids under five on it along with my wife and a coworker. 4 horse pushed us about four to five mph. very stable and plenty of room for three adults to fish
 
Got the livewell hooked up. (Had to go to the lake to test it out) Great day on the lake eight bass and two nice crappies. hoping to start decking it soon so my kids can quit tripping over the ribs. also got to use my homemade push pole today.
 

Attachments

  • IMG_20130710_084608.jpg
    IMG_20130710_084608.jpg
    737.4 KB · Views: 7,795
  • IMG_20130710_103635.jpg
    IMG_20130710_103635.jpg
    560.7 KB · Views: 7,795
  • IMG_20130710_132400.jpg
    IMG_20130710_132400.jpg
    449.4 KB · Views: 7,795
  • IMG_20130710_165826.jpg
    IMG_20130710_165826.jpg
    433.2 KB · Views: 7,795
  • IMG_20130710_165839.jpg
    IMG_20130710_165839.jpg
    606.2 KB · Views: 7,795
  • IMG_20130710_165845.jpg
    IMG_20130710_165845.jpg
    491.5 KB · Views: 7,795
  • IMG_20130710_170345.jpg
    IMG_20130710_170345.jpg
    669.5 KB · Views: 7,795
  • IMG_20130710_170418.jpg
    IMG_20130710_170418.jpg
    681.9 KB · Views: 7,795
  • IMG_20130710_170444.jpg
    IMG_20130710_170444.jpg
    785.3 KB · Views: 7,795
  • IMG_20130626_163022.jpg
    IMG_20130626_163022.jpg
    389.4 KB · Views: 7,795
  • IMG_20130626_163029.jpg
    IMG_20130626_163029.jpg
    356.8 KB · Views: 7,795
Nice looking boat you have there, joseph. Looks like you have a nice little family going there also. I understand the reasoning for a small motor, but I also know that you might need a larger one to keep you out of trouble with that large boat if you are in faster running water. I have the 14' model of that same boat and if you look at my avatar you will see that I have 3hp motor and an 18hp motor on the back. The whole thing breaks down to having fun and being safe. Good Luck.
 
BrazosDon said:
Nice looking boat you have there, joseph. Looks like you have a nice little family going there also. I understand the reasoning for a small motor, but I also know that you might need a larger one to keep you out of trouble with that large boat if you are in faster running water. I have the 14' model of that same boat and if you look at my avatar you will see that I have 3hp motor and an 18hp motor on the back. The whole thing breaks down to having fun and being safe. Good Luck.[/quote

the only water around here i feel safe with are the lakes. the only rivers are 1.5 and 4 miles wide so i am limited to 9.9 or less for the only water i can safely run on. but they are all good fishing so one cant complain
 
[url=https://www.tinboats.net/forum/viewtopic.php?p=321920#p321920 said:
Lil'Skeeter » Today, 07:26[/url]"]Nice looking rig. I really like the live well system.


I was actually kinda surprised that it had a live well. alumacraft lists it as storage so when i got home and opened it up i felt like a little kid on christmas. When i took it out yesterday 25 or 30 gallons fit in it i cant remember if it was five or six buckets full. doesnt look like its the size of my small fish tank in there. only complaint i have about it is when i got the fish home they were to lively to hold on to and fillet.(but thats the point of it.)
 
started on the rear floor with a piece of plywood i had laying around. its not in the best of shape but will do till after i go fishing on friday. at least it will be easy to make my new floors next weekend when i have more time. and the front will be interesting with the mod v.
 

Attachments

  • IMG_20130720_084049.jpg
    IMG_20130720_084049.jpg
    554.1 KB · Views: 7,584
  • IMG_20130721_195443.jpg
    IMG_20130721_195443.jpg
    422.7 KB · Views: 7,584
  • IMG_20130721_195519.jpg
    IMG_20130721_195519.jpg
    553.2 KB · Views: 7,584
  • IMG_20130721_195539.jpg
    IMG_20130721_195539.jpg
    698 KB · Views: 7,584
  • IMG_20130721_203004.jpg
    IMG_20130721_203004.jpg
    525.3 KB · Views: 7,584
  • IMG_20130721_203012.jpg
    IMG_20130721_203012.jpg
    544.3 KB · Views: 7,584
  • IMG_20130721_204937.jpg
    IMG_20130721_204937.jpg
    506.1 KB · Views: 7,584
  • IMG_20130721_205020.jpg
    IMG_20130721_205020.jpg
    500.4 KB · Views: 7,584
  • IMG_20130721_205033.jpg
    IMG_20130721_205033.jpg
    433.1 KB · Views: 7,584
finally tried the floors out. it was a one fish day but it was a personal best. 24" chain pickerel
 

Attachments

  • pickerel.jpg
    pickerel.jpg
    83.1 KB · Views: 7,447
  • pickerel 2.jpg
    pickerel 2.jpg
    49 KB · Views: 7,447
nice little boat... im wishing i had just bought a new one...but im past that point..

good luck with them v-ribs in the front!!!

i suggest, getting some angle and make some supports to straighten them out, raise the floor...look around through some of the builds on here... plenty of examples...

im curious what that 4hp does on that hull.... im guessing it just pushes it at a good displacement speed...faster than a trolling motor for sure!!
 
[url=https://www.tinboats.net/forum/viewtopic.php?p=324263#p324263 said:
marshman » 14 minutes ago[/url]"]nice little boat... im wishing i had just bought a new one...but im past that point..

good luck with them v-ribs in the front!!!

i suggest, getting some angle and make some supports to straighten them out, raise the floor...look around through some of the builds on here... plenty of examples...

im curious what that 4hp does on that hull.... im guessing it just pushes it at a good displacement speed...faster than a trolling motor for sure!!

on the front i am actually going to do what gillhunter did to his boat. https://www.tinboats.net/forum/viewtopic.php?f=21&t=18906
if you extend the front deck two ribs it all but flattens out the pitch from front to back. then its just three ribs that are easy to level out. The four horse motor doesnt do to much 2-3 mph i would guess. its for sale right now to put money towards a 9.9 or 15 with 9.9 stickers.
 
over the last few weeks i have done a few thing to the boat but mostly fishing. tonight i installed an anchor lock on the back. i have a plan made out to deck, the front and use the space between both benches as storage. I have all the angle i need for the frame and am just waiting on rainy days that im off to start building it.(cant waste good days on mods). Finally sold that four horse and am planing to get a new motor but havent decided what i want yet. Had a great day out on the lake today also 14 crappie none smaller than 8 and a few at around 11.
 
i have the same exact boat as you, except with a 25 hp merc. Mine has the center seat storage, but no plumbing installed - can you take pics of how the plumbing is run? thanks
 
[url=https://www.tinboats.net/forum/viewtopic.php?p=327272#p327272 said:
JoshKeller » Yesterday, 22:12[/url]"]i have the same exact boat as you, except with a 25 hp merc. Mine has the center seat storage, but no plumbing installed - can you take pics of how the plumbing is run? thanks

I didnt have to run any plumbing. i bought a live well pump(bilge) from walmart that came with a plastic pipe and a piece of pvc with slits in it. then i just drilled a 1/4 inch hole thru the rear of the bench at the top right corner of the live well ( make sure its the top or it will leak). and ran the wires to the back. i fill it up with a five gallon bucket at the ramp when i use it ($1.50) at walmart. then to drain i just pull the tube out and put it over the side of the boat.

I also have finished decking the front of my boat finally. decided not to carpet it because i liked my other boat with just the wood floor. its easy to clean. If you have any questions about anything fell free to ask.
 

Attachments

  • IMG_20130825_162655[1].jpg
    IMG_20130825_162655[1].jpg
    794.6 KB · Views: 2,432
  • IMG_20130825_162653[1].jpg
    IMG_20130825_162653[1].jpg
    881.4 KB · Views: 2,432
  • IMG_20130825_163043[1].jpg
    IMG_20130825_163043[1].jpg
    909.4 KB · Views: 2,432
  • IMG_20130825_163112[1].jpg
    IMG_20130825_163112[1].jpg
    750.4 KB · Views: 2,432
Took the boat out for the first time with the deck. It felt pretty good. A lot better than those ribs. Also got into some good crappie and a few nice bass.
 

Attachments

  • IMG_20130826_114339.jpg
    IMG_20130826_114339.jpg
    250.5 KB · Views: 2,401
  • IMG_20130826_093458.jpg
    IMG_20130826_093458.jpg
    854.1 KB · Views: 2,401
finally compleatly done with the boat. only other thing to do is add the motor when i chose one. probably wont untill after may of next year. "gotta love going tdy" posted pics of the finished product.
 

Attachments

  • IMG_20130916_104838[1].jpg
    IMG_20130916_104838[1].jpg
    230.9 KB · Views: 2,348
  • IMG_20130924_101430[1].jpg
    IMG_20130924_101430[1].jpg
    316.5 KB · Views: 2,348
  • IMG_20130924_101525[1].jpg
    IMG_20130924_101525[1].jpg
    416.7 KB · Views: 2,348
  • IMG_20130924_101616[1].jpg
    IMG_20130924_101616[1].jpg
    310.9 KB · Views: 2,348
  • IMG_20130924_101622[1].jpg
    IMG_20130924_101622[1].jpg
    362.7 KB · Views: 2,348
The thing is i want to carpet it and when it gets wet it will try to fall apart.I will just make it a wood removable floor.
 

Latest posts

Top