Aluminum deck frame

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

estrst25

Member
Joined
Nov 6, 2015
Messages
19
Reaction score
0
Hello All,

New to the forum and jon boat modifications. I have a 12 ft sea king I am wanting to put a casting deck in. What is the minimum size of aluminum angle that should be used? Could I use 1/16 by 3/4 if I use a lot of upright supports? Thanks in advance
 
I used1/8" and 1/4" for critical areas. I have 3/4" and 1 1/4" for the same reason. I even use Square tube for more support, especially if I am standing on it.
Good luck.
 

Latest posts

Top