clubs in texas

[jsharp]

any clubs in texas

 

[huntinfool]

I don't know of any that are just for aluminum/tinboats. There are several around that follow a regualr circuit. I don't know of any for smaller boats. I've thought about approaching a local club and asking them about starting an aluminum only boat club, but I just don't know how much intrest there is.


BTW we should hook up sometime and go fishing.

 

[cntryislandboy]

i would be on board for a jon boat club, i just moved to tx, in the abilene area

 

[larry]

dont think there is any clubs in texas but maybe we should start one

 

[Sayre32]

Did anything ever come from this post? We all seem to be in the same general are.

 

[albright1695]

Start your own!! Hydrilla and I started the CNCBA(Central NC Bass Anglers) this year and it was a lot of fun. Looks like you already have 5 guys interested. Just contact the administrator here and start your own page and post your schedule,rules,etc. It doesnt take much to get one going and just keep it simple to start with. If you have any questions I will try to answer them as best I can.


www.cncba.x10hosting.com

 

[Sayre32]

That is why I posted that. Just trying to see if anybody was still interested. Thanks for the support/suggestion though.

 

[richg99]

OK I am in. Bought a 160W Lowe two weeks ago. FINALLY dropped her in the water at Conroe (Scott's Ridge) this afternoon.

I am happy with the boat but disappointed with the trailer arrangement. I paid both my mechanic and McClain Trailers some $$$ to check out and fix up this boat and trailer.

The boat and the engine and everything else is fine.....which is what I normally expect from NorthShore Marine..( I've used them for 15 yrs)..BUT the ancient 1986 trailer has been a bit of a problem. Wiring grounds were not well done....and, after that ....McClain re-did the supports..but put them WAY too high. I'll haul her back to them Monday.

I reset the wiring grounds myself this afternoon, and all is well there. The position/height of the boat on the trailer is something that Mc Clain can work out.

Let's get together some place! Just pick it...and I'll be there.

Rich

 

[Sayre32]

That sounds great. I will try to get some of these other guys involved and work out a meeting date.

 

[rico86]

im in!! do any of you guys ever fish buffalo run?

 

[richg99]

Buffalo run????? rich

 

[rico86]

here it is

https://www.missouricitytx.gov/Government/Parks-and-Recreation/Parks/Buffalo-Run-Park

 

[RAMROD]

I could do a Livingston/Conroe area when off of work. Work = 14-14

 

[motfua]

Im in Magnolia and would be interested in a Texas tin club.
Am planning on picking up a boat right after the christmas season is over.
Like to fish Raven in Huntsville state park, conroe, livingston areas.
I do a little saltwater also when I can afford the gas for the trip.
tom

 

[Seabeaver]

I'm in Katy and would like to join a local jonboat club also. Got my first jonboat so it's time to get off of the dang pier and catch some fish.

 

[RAMROD]

Sounds like someone needs to take the bull by the horns!

 

[nlester]

One thing to remember about Texas is it's size. Texarkana, Tx is closer to Chicago, Ill than it is to El Paso, TX.

 

[RAMROD]

That just means we need more than one and then could have a North, South, East, and West fish off! :lol:

 

[motfua]

Ramrod,, Rich
Are we going anywhere with this??
I will be at the Caddo Lake flyfishing weekend on weekend of May 17th thru 19.
If nothin else maybe we could have a small "get together" there.
Besides it's a neat place to wet a line.
tom

 

[RAMROD]

Have been at Livingston all week.