TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Motors
Fuel delivery/crank seals
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="ckr74" data-source="post: 491274" data-attributes="member: 3623"><p>Thanks for the reply. I pulled the flywheel yesterday to take a look at the top seal. It appeared to be in good shape with no oil around it. I did spray some soapy water on it and it didn't leak in around the shaft. The motor idles good with no hesitation when throttled up. At WOT it doesn't really sag any but the RPM's fluctuate a little and then starves for fuel. It will only go a couple hundred yards at WOT before having to back off the throttle. WOT is 5200 RPM but it seems labored if that makes sense.</p></blockquote><p></p>
[QUOTE="ckr74, post: 491274, member: 3623"] Thanks for the reply. I pulled the flywheel yesterday to take a look at the top seal. It appeared to be in good shape with no oil around it. I did spray some soapy water on it and it didn't leak in around the shaft. The motor idles good with no hesitation when throttled up. At WOT it doesn't really sag any but the RPM's fluctuate a little and then starves for fuel. It will only go a couple hundred yards at WOT before having to back off the throttle. WOT is 5200 RPM but it seems labored if that makes sense. [/QUOTE]
Verification
Post reply
Forums
Boats
Motors
Fuel delivery/crank seals
Top