My 1436 project

jt25

Active member
Joined
Feb 12, 2012
Messages
40
Reaction score
0
Location
Calhoun, GA
I wanted to post some before and after pics of my project. I picked up a 1436 a while back. I have finally got the ball rolling on getting it fixed up. Every bench seat in the boat had swis cheese like holes in them. Someone attempted to install a car radio in one of the bench seat. The transom was really bad as well. The corners of the transom had huge holes in them where someone attempted to install lights when that did not work the holes were pated with an old license plate. So here are some more before and after shots of the metak work so far.
 

Attachments

  • bench1.jpg
    bench1.jpg
    33.7 KB · Views: 3,172
  • bench2.jpg
    bench2.jpg
    25.7 KB · Views: 3,172
  • corner pic.jpg
    corner pic.jpg
    46.9 KB · Views: 3,172
  • corner2.jpg
    corner2.jpg
    27.9 KB · Views: 3,172
  • cor1fin.jpg
    cor1fin.jpg
    31.4 KB · Views: 3,172
  • cor2fin.jpg
    cor2fin.jpg
    24.1 KB · Views: 3,172

jt25

Active member
Joined
Feb 12, 2012
Messages
40
Reaction score
0
Location
Calhoun, GA
Finally have a nice day. Going to flip the boat over and work on the bottom. Hoping to sand, clean, and prime today.
 

jt25

Active member
Joined
Feb 12, 2012
Messages
40
Reaction score
0
Location
Calhoun, GA
I got my trolling motor mount finished up. Just needs a little more sanding and it will be ready to mount.ImageUploadedByTapatalk1364169423.538750.jpg ImageUploadedByTapatalk1364169438.967484.jpg
 

jt25

Active member
Joined
Feb 12, 2012
Messages
40
Reaction score
0
Location
Calhoun, GA
Thanks Dave. Today I worked on the bottom. Finished up sanding. Got it cleaned up nice, and got a coat of primer on it.ImageUploadedByTapatalk1364430132.556086.jpg ImageUploadedByTapatalk1364430145.983140.jpg
 

jt25

Active member
Joined
Feb 12, 2012
Messages
40
Reaction score
0
Location
Calhoun, GA
Got all the metal work done on the outside. Also got it cleaned and primed. Up next a couple of coats of ultra flat dead grass green.ImageUploadedByTapatalk1365360194.009633.jpg ImageUploadedByTapatalk1365360210.574323.jpg
 

jt25

Active member
Joined
Feb 12, 2012
Messages
40
Reaction score
0
Location
Calhoun, GA
Finally got a few days to work. Started working on the trailer. Need to get it finished up so I can get the boat off the sawhorses.
BeforeImageUploadedByTapatalk1367443122.397642.jpg ImageUploadedByTapatalk1367443142.882328.jpg

Got all the attachable parts off. We primed and painted them today.
ImageUploadedByTapatalk1367443224.965750.jpg
 

jt25

Active member
Joined
Feb 12, 2012
Messages
40
Reaction score
0
Location
Calhoun, GA
My son said we need our own logo, so this is what we came up with. It will be on the underside of the bench seat/storage area.ImageUploadedByTapatalk1372908727.244162.jpg
 

Latest posts

Top