New Transom – 1976 Starcraft ‘Holiday 15’ Model

[DaleH]

Dale, do you use the same epoxy you coat the transom board with to fill in the oversized fastener holes? How oversized do you go? Seems like 1/4-20 bolts, 3/8", and 1/2" bolts would be the most common you would see when replacing a transom.

Yes, same mix, no thickener (cabosil) added. This transom was all 1/4" hardware, so likely 3/8"+ sized holes, nit sure if I mentioned it in photos above ... and didn't look.