Replacement for wood console

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

el_cheapo

Well-known member
Joined
Apr 11, 2016
Messages
70
Reaction score
4
Location
Western mo
I've just about got my starcraft fishmaster 16 situated, steering is a little stiff and it's not helped the wood console. I've been thinking about doing diamond plate, starboard or a cutting board material to replace it. I suppose I could use marine plywood but I don't really want to buy an entire sheet for it. Also any tips on steering wheel removal, usually it's seized to the shaft. I probably could use a new cable anyway and these vevor kit's don't look like a terrible deal. Any experience with them?

https://www.vevor.com/boat-steering...Bw9508LIVKIlCekK-wuei-eaylHrrZfQaAmZzEALw_wcB
Also I never would have guessed my livewell was factory, but apparently it is. Found the brochure below, it has been a practical little boat and the 85 horse pushes it along pretty well.

https://www.starcraftmarine.com/sites/default/files/catalogs/StarCraftFishBoats1979_web.pdf
 

Attachments

  • PXL_20230525_172531224.jpg
    PXL_20230525_172531224.jpg
    130.3 KB · Views: 0
  • PXL_20230525_172547109.jpg
    PXL_20230525_172547109.jpg
    91.7 KB · Views: 0
  • PXL_20220605_202531400.jpg
    PXL_20220605_202531400.jpg
    84 KB · Views: 0

Latest posts

Top