SeaArk Rescue

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Tin Ark

Well-known member
Joined
Jan 5, 2021
Messages
107
Reaction score
18
Location
Crystal River
Just picked up an 1872 SeaArk and it's a full out rescue project. Rather than documenting a rescue with photos, thought I'd start a YouTube channel that documents the project from day one. And so it begins.

http://www.youtube.com/watch?v=va6_sF_s__Y
 
Looks like a fun project. Hell of deal on the hull and trailer!

Out of curiously, how are you planning. Taking the boat off the trailer and storing the boat while the trailer is getting rebuilt?

I’ll certainly be following along your project. Looking forward to watching more videos and following your progress.
 
Thanks, yes a buddy has a lift at his house so going to get the boat off the trailer and head to St Pete to have the trailer work done, then to Ocala to have it media blasted and primed for paint.
 
Here's the 1872 I redid many years ago. I actually forgot my log in credentials so just registered a new account.

https://forum.tinboats.net/viewtopic.php?t=29196
 
Day 4 update and the floor removal. A challenge as I thought.....

http://www.youtube.com/watch?v=jaAimdjS4cw
 
I think I heard in your Day 4 video that you were going to use King Starboard for the poling platform. Because that stuff is going to be pretty slippery, are you going to cover it, score it, or something? Additionally, the two supports are pretty far apart. Are you concerned it will sag in the middle? Don't get me wrong, I think it is a great product and will last forever. I've just not seen it used that way before.
 
Updated, after additional research and input from a member over at The Hull Truth the Starboard is not only costly but NOT as stable since it would lack support for my weight, I am 175. So the new plan is to use 3/4" Marine grade Okume plywood and use a 3/8" roundover router bit on both sides to create round edges. Then sand prime with Interlux epoxy primer followed by two-part with silica powder nonskid and weighs a lot less than Starboard.
 
And back in WARM Florida thank God. Day 7, the process moves forward :mrgreen:

http://www.youtube.com/watch?v=xy2SXcmbnOc&t=584s
 
Day 8 and Owen's And Son Marine AKA Slide On Trailers. Dropped the trailer off for a full refurb, got a call about 3 PM and it is
DONE !

Picking it up tomorrow and then cleaning it up.

http://www.youtube.com/watch?v=8lw_NgiK3A8
 
Day 9 and the trailer is done, Owens and Son knocked it out of the park in ONE day. Picked it up on Tuesday morning the 18th and today, a quick run down to Hernando County and had the trailer sand blasted. As good as new, a few more trailer odds and ends but for the most part, ready to roll. The difference between a GREAT day on the water and a NIGHTMARE of a day is as SOLID TRAILER. Makes life SO much easier at the ramp.

http://www.youtube.com/watch?v=1rVyzac3l9U
 

Latest posts

Top