The VRO pump was disconnected at power, the alarm plug, and hose had been plugged off. So I have already removed the tank and hose. Haven't looked to see what was in there. But now I'm going to have to take a look.
I think I'm going to get fuel pump 438556.
Remove the current pulse pipe ( flame...
Yes I did replace the fuel lines.
When I got the boat the VRO was disconnected.
The VRO pump leaked a little at first around the larger diameter circle where the 6 screws are. After 2 weeks I checked again and it stopped leaking.( That is when the wife got shot in the face by the recirculation...
Well as usual I was wrong. LOL.
The hoses I was talking about did NOT go to a T.
There is a T there but those particular hoses do not connect to it the way I said they did. One does one does NOT. See pics. I'll edit post to add new pic as I replace hoses. In real time.
This is the hose after...
Thanks for enlightening me on this.
I have a question. How do i reach the location the hose goes under the lower carb without removing the carb.
I was able to reach the top starboard barb by removing the wiring buss(?). Using a pair of long needle nose pliers, I was able to get to that one...
Started thinking and there has to be a reason that the hose has such a thick wall so prob best to replace with same stuff.
So I was able to locate a repair shop where I'm working this week that had the hose instock. Got 8 feet.
Shop told me that hose lubed the upper and lower bearings and the...
Have a 1986 Evinrude 110hp there are these hoses that go from the side of the block to the underside of the carbs.
The hoses look to be 1/16" ID 1/4"OD. Looks like I could use the the thin-walled 1/16 weedeater type hose.
What would/could it hurt?
Anybody have a manual or info on this outboard.
SN 3939849
Just pick it up yesterday. There is rubber rod/tube that is loose on the leg and I not sure what it does.
There is also a spring at the transom mount that is broke and not sure what it does or where it goes.
I think the spring works...
Check craigslist.
saw some nice boats there. I'd check more like Frankfort or Lexington or Somerset. better prices
or even eastern KY or Ashland-Huntington,WV
WV state line only 3.5hr drive from Louisville. Been working on Kroger at Stoneybrook.
Mine had the handles at the rear same as yours.
Question did you put that wood on the outside of the transom.
Reason I'm asking, standing behind rear of boat. Lower right corner WAS the info plate for my boat.
I also wouldn't recommend securing boat to trailer through those handles. Just wrap...
Kinda, looks like my old 1963 Applebee.(applebe?)
except mine has (had) 2 braces at each (3) benches. I added decks.
mine also had the support up front that was inline with the very front bench.
mine does have the metal cover at the transom. and at the corners.
but the metal at the bow is...
When I got this engine it hadn't been ran in about 4 years.
The previous owner said the distributor cap was cracked and rotor button messed up.
Once home I popped the hood saw the rubber on the electric wires were very brittle.
I plan on replacing all wires and checking the distributor cap and...