YeOldeRusty

I would swap for a 70 ECU if they had the same valves. I think the F70 is a 16 valve, which means the ECU won't work with it. Yes, they...

Not sure how your boat is setup, but typically if you add more setback you can run the motor higher. Think about the water coming off...

I usually notice how high other boats ride when I'm running right there with them. So I don't think its a speed thing necessarily. I am...

In my experience with this boat it has been the opposite. The higher I can run the motor without cavitation, the faster it goes...

Just checking behind me occasionally to make sure it's pissing. I plan on adding a cavitation plate from Circle S machine which should...

Couldn't tell you exactly. I'd say I've got 5-6 inches of freeboard at the transom sitting still. Sits pretty low. Mostly because the...

Xpress uses an injected expanding foam that will not absorb water. Removing it would be a major ordeal it's literally in every cavity...

I've always heard the pad hull rides great, but you need a good bit more than 50hp to really ride on the pad. Makes sense because Xpress...

Have you played around with jack plates and setback? Raising motor up is a great way to gain rpms. Less motor in the water means less...

Gotta have a tach before you really start playing the prop game. Otherwise you're just shooting in the dark. The original prop was a 12p...

Motor is propped appropriately and I switch depending on situation. With the 14p YBS clone I run now it sits at 5900 rpm with me and...

I've been running a 2017 Xpress 16DBX that I bought about 10 months ago. I've spent plenty of time getting it setup to run how I like...