I recently purchased this 13’ (possibly homemade) semi V Hull with a 93’ Yamaha 15hp. I’m familiar with Jboats but this is my first time dealing with a fiberglass boat. I’m looking for suggestions on what I can put around the outer railing gunwale area for better esthetics and to not have raw fiberglass edge. You can see in the pictures that the side is rolled down at the top. Anyone have suggestions, rubber molding? Others?
I will add better pictures of the sides and how the fiberglass rolls over.
Also any other tips, or experiences with small fiberglass boats is appreciated.
Side note, I removed the front white composite boards, I am in the process of replacing the transom, plan on turning the front into a casting platform, and repainting.
Main use will be the creeks and springs in central Florida.
Thanks
I will add better pictures of the sides and how the fiberglass rolls over.
Also any other tips, or experiences with small fiberglass boats is appreciated.
Side note, I removed the front white composite boards, I am in the process of replacing the transom, plan on turning the front into a casting platform, and repainting.
Main use will be the creeks and springs in central Florida.
Thanks
Attachments
-
635FD2FC-E05C-4BD4-A4F2-8C4141DCA431.jpeg102.7 KB · Views: 237
-
B294D06E-CC0A-46AF-BEED-5403E61C8A47.jpeg134.5 KB · Views: 237
-
BEF14761-50F7-4741-A23D-67938919D303.jpeg4.3 MB · Views: 237
-
4D8959D2-9A6D-4E85-8FA3-7E4ED84D3898.jpeg4.1 MB · Views: 237
-
8416434C-8F2F-4537-9DA0-F32C12758EED.jpeg4.7 MB · Views: 237