14' Bass tracker mod

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mikejames

Active member
Joined
Aug 30, 2012
Messages
26
Reaction score
0
Location
Inwood, WV
I've been pretty much lurking around here for almost a year now looking at ideas for my mod and finally decided it was time. I am adding a bigger casting deck up front, new floor and paint. I am thinking about installing a radio too, but not sure on that yet. The deck will be framed with aluminum since I get it free. Main reason in doing this mod is for more storage, I can't stand a lot of stuff all over the place having to climb around it all the time. Yesterday I got the old deck, floor and carpet removed.

This is how it looked when I started.
af8251b4-828d-4ab0-af03-80142ca0b3b3.jpg

f794ac8b-78ec-4da6-9e59-ea5b6a69b9e4.jpg


This is after removing the old deck, floor and carpet.
2ba9d104-c7a0-4045-bd28-4cee18c7083b.jpg
 
Cleaned the inside, removed any loose paint and used some self etching primer on bare spots. I ordered a couple quarts of Rustoleum topside that should be in today. Started on the front casting deck, ran out of aluminum until this evening when my cousin brings some more over.
7f5afac0-6a00-4724-96e2-00892e2cda87.jpg


17dc3756-ef46-428f-b1ae-8ff3f7eafcc0.jpg
 

Latest posts

Top