2004 Alumacraft Lunker

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dkotarski

New member
Joined
Oct 13, 2019
Messages
2
Reaction score
0
Recently became the proud owner of a 2004 Alumacraft Lunker 165. Was going to install a minn kots power drive trolling motor on the front but there's not a lot of room to mount it some what straight off the bow.
It seems I have to mount it more of an angle across the bow. Any feed back on putting it more left of center and straighter would be helpful. Thank you!!!
 
If you find that mounting the motor straight off the bow will not work due to the lack of space, mounting it at an angle across the bow could be a viable solution.

 
Last edited:
Top