vahunter
Well-known member
I know this has been talked about a lot and I've read a lot. I mocked a med size beavertail pod and it has clearance but I may go with a small, or if I end up building my own i may go somewhere in between a small and med. Ive read to flush the sides and the bottom edge but with about a 1" upward angle. My weldbilt has a slight V on the bottom and with the side of the pod lined up with the side of the boat the top and bottom will be parallel to each other obviously keeping the bottom flush.
Soooo, should pods be flush to side and bottom? Or flush to side with bottom corner flush but with the pods parallel to each other.
If they are best flush to sides and bottom ill build some. If they are best parallel, ill probably just buy the beavertails. If thats the case should i get the small or medium. The mediums look a little big on the boat but I have a few inches clearance to cav plate. Or should I get the small for more clearance? Thanks,
Buddy
Soooo, should pods be flush to side and bottom? Or flush to side with bottom corner flush but with the pods parallel to each other.
If they are best flush to sides and bottom ill build some. If they are best parallel, ill probably just buy the beavertails. If thats the case should i get the small or medium. The mediums look a little big on the boat but I have a few inches clearance to cav plate. Or should I get the small for more clearance? Thanks,
Buddy