mtnwkr
Well-known member
This is the trailer that came with my boat, looks like it was set up for a smaller boat originally. Small bunks in back that tilt and a single roller up front. I'd like to give it more support. The boat is 13.5', 200lb hull, all welded. I think what would be best is move it forward about a foot and attach two long non tilting bunks, but that would throw off the balance over the axle and it has a pretty short tongue as it is. Any ideas? Also, would it be possible to use a transom saver with this trailer? Thanks..
![5466357028_68f30618f3_z.jpg](https://proxy.imagearchive.com/1dd/1dddbcb5026633e2b1b8747b4d784ec9.jpg)
![5466352864_d073d8e374_z.jpg](https://proxy.imagearchive.com/396/39652cc91d7a3824799358a04a992302.jpg)
![5466351298_ce4a8154b2_z.jpg](https://proxy.imagearchive.com/731/73103e53dd3b0836e0584151d1f524ce.jpg)