Sgt. Stiglitz
Well-known member
Here is what I did to mine. My bottom curved also and I couldn't figure out how to do a flat bottom either till I saw others here what they did......I built my gas tank into the middle bench area. If I need to remove it, all I have to do is remove a few screws and pull up the decking........It gets fill through a twist off cover.........
https://www.tinboats.net/forum/viewtopic.php?f=21&t=15880
https://www.tinboats.net/forum/viewtopic.php?f=21&t=15880
![101_1182.jpg](https://proxy.imagearchive.com/4c5/4c50a1a35b4874fb334aa3afd07a93ab.jpg)
![101_1157.jpg](https://proxy.imagearchive.com/6d4/6d4cdcc17bd094cbd58e15eb0c0f620a.jpg)
![101_1165.jpg](https://proxy.imagearchive.com/660/6609d2fec711c4e26ae48bd1e173fded.jpg)
![BeforeandAfter.jpg](https://proxy.imagearchive.com/b5b/b5b29cec7f088df019ac7dfa1ff625ae.jpg)
![101_1701.jpg](https://proxy.imagearchive.com/dda/dda26cef02055c7b290d299aba74cb7b.jpg)