foxtrot
Active member
- Joined
- Nov 14, 2013
- Messages
- 26
- Reaction score
- 0
Ok I have a battery selector switch. It has batt #1, batt #2, 1+2, And off. I want to change my trolling motor battery (batt #2) to a bow position but my wiring terminal is in the stern. I want to know if I can just wire the positive to the switch, then to the accessory terminal then I could run the ground from the accessory terminal to the negative post on my starting battery(batt #1). Or would I have to wire the ground to my trolling motor battery.