Recent content by cjbassinboy

Hi all, This is kind of hard to explain but i will try my best. I have a simple seat swivel bolted to the wooden deck of my jon boat, with a seat attached to it. When i put it on, the wooden deck was not on the boat, so we had access to the backside of the bolts, so we could prevent them from...

thanks guys! ive gotta get the engine serviced but then i can finally take her out!

Finally done!!!! Thanks to all that helped me, especially bassboy1, thank you so much for welding that hole for no cost!!!! Here she is! the above picture is of the storage underneath the front deck, i'll have my trolling motor battery and small accessory battery there along with a...

Finally the weather here was good enough to apply the Spar Urethane! Put the first coat on everything but the front deck which hasnt been cut to size yet, will be next weekend though. How many coats do yall think i should apply?

Im gonna stick with wood, aluminum just isnt in the budget. next time around it will be!

Here is the base of the livewell, we will just place the plywood deck over it, it actually gives some integral support to the deck.

Got the middle seat out today, hit another bump because the livewell was riveted to the floor....cut the livewell down to the bottom inch or so, we're just gonna leave it there, i dont wanna mess with rivets! Next weekend we will fit all the plywood and construct the front deck supports. What...

Re-wired part of the running light wiring, is now water proof and can easyily connect to the mini 12v batterys i got from cabelas, i used some female disconnects that fit right on the battery!

My contractor friend had to cancel on me to help fit the deck and take out the center seat, so my dad and I will be taking out the center seat. Will a jig saw work?

Mr. Dawson i cant thank you enough!!! I will be PMing you!!!

Ive kinda hit a bump in the road...when i take out the seat with the livewell in it, how should i fill in the livewell drain plug??

Darn! i got my seats from bass pro, wish i had known about that!

Picked up all the plywood, and got it cut to roughly the shape it needs to be, tomorrow i will be taking out the middle seat and fitting all the plywood.

ive got a drill, do i just drill em in?

Hi all, I will be riveting some 1/2in plywood with carpet to my jon boat, what size rivets should i use?